Type “d – Heath Zenith Wireless Chime 598-1172-04 User Manual

Page 4

Advertising
background image

-4-

598-1172-04

TYPE “D”

TYPE “D”

TYPE “D”

1

2

3

4

5

6

7

8

VOLUME

1

2

3

4

5

6

7

8

Note: Some models might require the use of
tweezers to remove and replace the jumpers.

Inside Push Button

Front of Chime Base

Tune Setting (Not
used on all models)

Tune Setting

Chime Volume
Control

TUNE SETTINGS

Your wireless chime has different selectable tunes:

Ding (one note), Ding-Dong (two note), or West-

minster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed by following the instructions below.

Ding (one note tune)

Inside Push Button: Add a jumper to location 8.

Ding-Dong (two note tune)

Inside Push Button: Remove jumper from location 8.
Front of Chime Base: Remove jumper from location 8.

Westminster (Eight note tune) (Available on selected chimes)

Inside Push Button: Remove jumper from location 8.
Front of Chime Base: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recommend the back door
use the

Ding tune and the front door use the Ding-Dong tune (or Westminster tune, available

on selected chimes). Models that include two push buttons will come factory set for front and
back doors. Decals on the rear of the push button will indicate its setting.

Figure 9

Advertising