HP 2700 User Manual
Page 95
5.
Remove the orange shipping locks and the shipping tape attached to the left shipping lock from
the new print cartridge. Discard the shipping tape and shipping locks according to local regulations.
6.
Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
7.
Firmly close the front door.
After a short time, Ready should appear on the control panel.
8.
Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived.
See the enclosed recycling guide for recycling instructions.
9.
If you are using a non-HP print cartridge, check the printer control panel for further instructions.
For additional help, see the Web sites listed in
.
ENWW
Replacing supplies and parts
85