HP 2700 - Manual (Page 33)

Menu item Sub-menu item Sub-menu item Description
Select Continue black to allow future
color jobs to print in monochrome (black
and white) mode until the empty
cartridge is replaced.
Replace supplies Override out
Stop at out
Override out: If the printer determines
that a print cartridge is empty, you can
continue printing until you notice a
decrease in print quality.
Stop at out: If the printer determines that
a print cartridge is empty, you must
replace the cartridge before printing can
continue. This is the default setting.
Cartridge low (1-20) The percentage threshold determines
when the printer begins reporting low
toner. The message is either reported on
the control-panel display or using the
toner LED, if it exists. The default setting
is 10%.
Restrict color Enable color
Disable color
Select Enable color to allow the job to
print in either monochrome (black and
white) or color depending on the
specifications of the job.
Select Disable color to disable color
printing. All jobs will print in monochrome
(black and white).
Courier font Regular
Dark
Selects a version of the Courier font. The
default is Regular.
Display contrast Medium
Darker
Darkest
Lightest
Lighter
Select the level of contrast for the
display. The default setting is Medium.
ENWW Using the control-panel menus 23