HP 2700 - Manual (Page 34)

Network Config. menu (HP Color LaserJet 2700n printer only)
Use this menu to establish network configuration settings.
Menu item Sub-menu item Description
TCP/IP config Automatic
Manual
Select Automatic to automatically configure all the
TCP/IP settings.
Select Manual to manually configure the IP address,
subnet mask, and default gateway.
Link Speed Automatic
10T Full
10T Half
100TX Full
100TX Half
The printer should automatically detect the correct
link speed for the network. Use this menu to set the
link speed manually, if necessary.
After you set the link speed, the printer automatically
restarts.
Restore defaults Press OK to restore the network configuration
settings to the default values.
24 Chapter 2 Control panel ENWW