HP 2700 - Manual (Page 64)

Using 2-sided (duplex) printing
To print a document on both sides, go to the printer and reinsert the paper manually after the first side
has printed.
NOTE Damaged or reused media can cause jams and should not be used. Do not print on both
sides of labels or transparencies.
For Windows, you must configure the printer driver for manual 2-sided printing.
To configure the Windows printer driver for 2-sided printing
1. Click Start, click Settings, and then click Printers or Printers and Faxes.
2. Right-click the driver icon, and then select Properties.
3. Click the Device Settings tab.
4. In the area for Paper Handling Options, select Allow Manual Duplexing. Click OK.
Manual 2-sided printing
1. Load paper into tray 1, tray 2, or optional tray 3.
If you are using letterhead paper, load it face-down, with the top edge at the back of the tray.
2. Open the printer driver.
3. Select the appropriate size and type.
4. On the Finishing tab, select Print on Both Sides (Manually).
NOTE The default setting is to bind on the long edge for pages in portrait orientation. To
change to short-edge binding, select the Flip Pages Up check box.
5. Click OK to print the first side.
54 Chapter 4 Printing tasks ENWW