HP 2700 - Manual (Page 77)

Paper handling
Use the HP ToolboxFX paper-handling options to configure your default settings. These are the same
options that are available on the menus on the control panel. For more information, see
Using the control-
panel menus .
Three options are available for handling print jobs when the product is out of media:
● Select Wait for paper to be loaded.
● Select Cancel from the Paper out action drop-down list to cancel the print job.
● Select Override from the Paper out time drop-down list to send the print job to another paper tray.
The Paper out time field specifies how long the printer waits before acting on your selections. You can
specify from 0 to 3600 seconds.
NOTE You must click Apply before your changes take effect.
Printing
Use the HP ToolboxFX printing options to configure the settings for all print functions. These are the
same options that are available on the control panel. For more information, see
Using the control-panel
menus .
NOTE You must click Apply before your changes take effect.
PCL
Use the PCL options to configure the settings when you are using the PCL print personality.
NOTE You must click Apply before your changes take effect.
PostScript
Use the PostScript option when you are using the PostScript print personality. When the Print
PostScript error option is turned on, the PostScript error page automatically prints when PostScript
errors occur.
NOTE You must click Apply before your changes take effect.
ENWW Using the HP ToolboxFX 67