Hitachi DZ-BD10HA - Manual (Page 24)

24
Le
t’
s Ge
t St
ar
ted
„ When loading a new BD-RE/BD-R/DVD-RW
When the disc is loaded, the format confirmation screen will appear in the LCD
monitor. Format the disc according to the procedure below.
Open the LCD monitor.
When the format confirmation screen appears, select “YES” by
pressing d, then press the confirmation button.
(When using a DVD-RW)
The recording format selection screen appears.
Select “VR Mode” or “VF Mode” by pressing d/c, then press the
confirmation button.
Removing the disc
Pressing slightly on the center hub with a finger, grip the
edge of the disc by your thumb and lift the disc out as
shown.
MENU
SELECT
 
The
confirmation
button
/
Note
Be careful that the power is not
accidentally cut off during
formatting. Otherwise, the disc
will become unusable.
When using a BD-RE/BD-R
Formatting will start. Skip step
.
When using a DVD-RW
Proceed to step
.
VR Mode
After recording, you can perform various editing functions such as
choosing and deleting scenes. You can play back the disc in a device
which supports 8 cm DVD-RW (VR Mode) after finalizing the disc.
VF Mode (Video mode)
Although editing cannot be done on the camcorder, you can play back the
disc on other DVD devices after finalizing the disc.