Hitachi DZ-BD10HA User Manual
Page 92
92
Ad
di
ti
on
al I
n
fo
rm
a
tio
n
Finalize may not be
complete. Finalize
again now?
This message will appear when power is supplied again
and the disc is reinserted after power was shut off during
finalization due to a power failure, etc. Choose “YES” to
make sure finalizing is complete.
77
Further recording on
this disc will be
impossible. Finalize?
(Approx. one min.)
(No menu image if it
can be played on
another device.)
This message will appear when the BD-R disc does not
have enough space for DZ-BD7HA/DZ-BD70A to add a
disc menu and finalize it. You can play back the disc on a
player/recorder, but the disc menu will not be displayed.
77
HDD almost full.
The remaining free space of the HDD is less than one
minute for video. Delete unwanted scenes.
66, 113
HDD/Disc/SD Card
has no image.
This message will appear when an attempt is made to
dub, playback, or editing when no scene has been
recorded.
—
HDD/Disc/SD Card
has no Playlist.
The Playlist menu was selected, but no playlists are
stored.
64
HDD error has
occurred.
Format the HDD before using the camcorder.
Formatting the HDD will delete all data recorded on it.
71
HDD error has
occurred. Format the
HDD now?
HDD error has occurred. Format the HDD now?
Did you interrupt the formatting of the HDD?
Choose “YES”, and then format the HDD.
Formatting the HDD will delete all data recorded on it.
71
HDD error has
occurred. Restart.
HDD error could have occurred during editing of scenes.
Turn off the camcorder with the HDD inside, and then
turn it on again. The camcorder will attempt to restore
scenes.
—
HDD/Disc/SD Card
includes protected
scenes. Delete
scenes?
The HDD/Disc/Card may be software protected from a
device other than this camcorder. To release, use the
device that executed the software-protect.
—
HDD/Disc/SD Card
is full. Cannot add
control information.
The number of entered scenes has reached the limit that
can be entered, so the control information for generating
thumbnails cannot be added.
Combine several scenes or delete them.
66–67
Message
Cause & Troubleshooting
Reference
page