Hitachi DZ-BD10HA - Manual (Page 55)

55
V
a
rious Recor
d
ing
Te
chniques
Using the Self-Timer
You can use the self-timer to record
still photos.
1
During still picture recording
pause, press MENU.
2
Select “Record Functions
Setup”
“Self Timer” “On”
3
Press the confirmation button
to confirm, then MENU to exit
the menu.
The self-timer is set and “q10”
appears in the LCD monitor (p.31).
4
Press PHOTO halfway to adjust
the focus, then press it all the
way down.
A countdown starts. In the LCD
monitor, the countdown is
shown as follows: “
q 10”, “ q 9”,
…. The photo will be recorded
about 10 seconds later.
During countdown, the
recording indicator on the lens
side also flashes.
• To cancel the countdown and
return to “ q 10”, press
PHOTO or C.
• The Self-Timer is set to “Off”
when the camcorder is turned
off or switched to movie
recording mode.
CARD