Hitachi DZ-BD10HA User Manual

Page 94

Advertising
background image

94

Ad
di

ti

on
al I
n

fo

rm

a

tio

n

Scenes over limit.
Cannot add scenes.

The number of scenes entered in a playlist has reached
the limit that can be entered.
Delete unnecessary scenes in the playlist.

63, 65

Scenes over limit.
Cannot divide scene.

The number of entered scenes has reached the limit that
can be entered.
Delete unnecessary scenes in the playlist.

65

SD Card almost full. Remaining space is only enough to record less than 10

stills. Delete unnecessary stills and try the card, or use
another card.

66, 113

SD Card error has
occurred.

Format the card before using the camcorder.

Formatting the card will delete all data recorded on it.

The card terminals may be dirty. Wipe off dirt, and try

the card again, or use another card.

22, 71

SD Card error has
occurred. Dubbing is
not complete.

This message will appear when dubbing has failed.

SD Card error has
occurred.
Format the SD Card
now?

The card may have been formatted on a PC, or formatting
may have been interrupted. Choose “YES” to format the
card. Formatting the card deletes all recorded contents.

71

SD Card error has
occurred. Keep SD
Card inside &
restart.

Card error could have occurred during editing of scenes.
Turn off the camcorder with the card inserted, and then
turn it on again. The camcorder will attempt to restore
scenes.

SD card full.

No more recording on this card can be done. Delete
unnecessary scenes or use another card.

66

SD Card is not
formatted.
Format the SD Card
now?

Was the card formatted on PC? Choose “YES” to format
the card.

71

Stop processing.

C was pressed to stop processing of multiple scenes.

System error has
occurred.

The camcorder may need servicing or a repair. Contact
your dealer.

119

The disc has been
finalized.
Unfinalized disc.

You have attempted to edit scenes stored on a finalized
BD-RE disc. Unfinalized the disc first.

78

The temperature of
HDD is outside the
operating
temperature range.
Turn off power, then
turn on again.

This message will appear if the temperature of the HDD
is outside the operating temperature range. Recording on
a disc may be possible even if this message is displayed.

112

Message

Cause & Troubleshooting

Reference

page

Advertising