HONDA Automobile Accessories - Manual (Page 10)

10 of 10 AII 21619 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved.
32. Unplug the 4-pin connector from the right fuse
box, and plug the 4-pin connectors of the sub-
harness into the fuse box. Plug the other 4-pin
connector into the 4-pin connector into the
connector you just unplugged.
34. Route the sub-harness along the vehicle harness.
Inside the glove box, locate the 2-pin connector
blue-taped to the vehicle harness, and remove
the blue tape to free the connector. Plug the 2-pin
connector of the sub-harness into the 2-pin
connector you just freed.
35. Secure the sub-harness to the vehicle harness
with three long wire ties in the areas shown.
36. Check that all wire harnesses are routed properly
and all connectors are plugged in.
37. Reinstall all removed parts.
38. Reconnect the negative cable to the battery.
39. Enter the customer’s radio anti-theft code, if
applicable, and reset the radio station presets.
40. Reset the clock.
41. Check operation of the keyless entry system
according to the owner’s manual supplied.
33. Push the clip of the sub-harness 4-pin connector
into the hole in the right front inner lower pillar.
SUB-HARNESS
VEHICLE
4-PIN
CONNECTOR
HOLE
IN INNER
LOWER
PILLAR
SUB-HARNESS
4-PIN
CONNECTOR
2-PIN
CONNECTOR
VEHICLE
HARNESS
SUB-HARNESS
BLUE
TAPE
(Remove.)
LONG
WIRE TIES