HONDA Automobile Accessories - Manual (Page 7)

© 2000 American Honda Motor Co., Inc - All Rights Reserved. AII 21619 (0008) 7 of 10
KEYLESS ENTRY
WIRE HARNESS
20-PIN CONNECTORS
OF KEYLESS ENTRY
WIRE HARNESS
VEHICLE
20-PIN
CONNECTOR
LEFT
FUSE
BOX
19. Under the dashboard at the fuse box, locate the
4-pin connector blue-taped to the vehicle harness
(22-pin connector), and remove the blue tape to
free the connector. Connect the 4-pin connector
you just freed to the 4-pin connector (C) of the
keyless entry wire harness.
20. Unplug the 20-pin connector from the left fuse
box, and plug the two 20-pin connectors (white)
of the keyless entry wire harness in between.
21. Locate the 2-pin connector blue-taped to the
vehicle harness 18-pin connector, and remove the
blue tape to free the connector. Connect the 2-pin
connector you just freed to the 2-pin connector of
the keyless entry wire harness.
22. Remove the clip from the hole in the left knee
bolster; then use a utility knife to cut and discard
the clip from the vehicle harness. Take care not
to damage the vehicle harness.
4-PIN
CONNECTOR
OF KEYLESS
ENTRY WIRE
HARNESS
KEYLESS ENTRY
WIRE HARNESS
VEHICLE
22-PIN CONNECTOR
BLUE TAPE
(Remove.)
LEFT
FUSE
BOX
KEYLESS ENTRY
WIRE HARNESS
2-PIN CONNECTOR OF
KEYLESS ENTRY WIRE HARNESS
VEHICLE
18-PIN
CONNECTOR
LEFT FUSE BOX
BLUE TAPE
(Remove.)
VEHICLE
2-PIN CONNECTOR
LEFT KNEE
BOLSTER
VEHICLE
HARNESS
HARNESS CLIP
(Cut and discard.)