HONDA Automobile Accessories - Manual (Page 6)

6 of 10 AII 21619 (0008) © 2000 American Honda Motor Co., Inc - All Rights Reserved.
17. Remove and discard the upper bolt that fastens
the engine hood opener, and attach the ground
terminal of the keyless entry wire harness with
the ground bolt from the kit.
15. Secure the 14-pin connector of the keyless entry
wire harness to the side of the vehicle connector.
16. Locate the two 2-pin connectors blue-taped to the
vehicle harness, and remove the blue tapes to free
the connectors. Plug the 2-pin connectors you just
freed into the 2-pin connectors of the keyless entry
wire harness. Connect the blue 2-pin connector of
the vehicle harness into the blue 2-pin connector of
the keyless entry wire harness.
18. Plug the 1-pin connector (white) of the keyless
entry wire harness into the No. 5 connector of the
fuse box.
KEYLESS
ENTRY WIRE
HARNESS
14-PIN
CONNECTOR
LEFT FUSE BOX
VEHICLE
CONNECTOR
LEFT FUSE BOX
2-PIN
CONNECTORS
(GRAY)
2-PIN
CONNECTORS
(BLUE)
KEYLESS
ENTRY WIRE
HARNESS
1-PIN CONNECTOR OF
KEYLESS ENTRY WIRE
HARNESS (WHITE)
GROUND TERMINAL
OF KEYLESS ENTRY
WIRE HARNESS
GROUND
BOLT
(from kit)
ENGINE HOOD
OPENER MOUNT
BOLT
(Discard.)
ENGINE
HOOD
OPENER
No. 5
CONNECTOR
OF FUSE
BOX