Heat & Glo Fireplace CERONA-36 - Manual (Page 8)

Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. H • 11/08 8
3 3
Framing and Clearances
Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
Figure 3.1 Appliance Locations
Note: For actual appliance dimensions refer to Sec-
tion 16.
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
ALCOVE
INSTALLATION
A
H
B
C
D
E
F
G
B
A
WARNING
CERONA-36 A B C D E F G H
Inches 51 42-1/8 73-1/4 36 65-1/2 1/2 22-1/4 16
Millimeters 1295 1070 1861 914 1664 13 565 406
CERONA-42 A B C D E F G H
Inches 56-5/8 49-1/8 80-1/8 36 72-1/2 1/2 22-1/4 18-3/4
Millimeters 1438 1248 2035 914 1842 13 565 476