Honeywell Switches and Sensors - Manual (Page 48)

46
www.honeywell.com/sensing
HDLS Series Side rotary actuated switches
Levers: Levers for side rotary types are ordered separately (see pages
69-71 for details)
Approvals: NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
UL, CSA, CE
Operating force (Newton meters, N m/in lb): LSA, LSL, LSM, LSM, LSP, LSU 0,45 N m max.
4 in lb max.
LSH, LSR 0,19 N m max.
1.7 in lb max
Conduit: ½ in - 14 NPT
Contacts: Electrical ratings A, B Silver
Electrical rating C Gold
Switching options: Snap action contacts
SPDT DPDT
SPDT Double Break
DPDT Double Break
Side rotary, momentary action
The momentary action listings shown are factory
assembled with the head adjusted for both
clockwise (CW) and counterclockwise (CCW)
operation. The shaft of side rotary heads face the
front (label side of switch).
Actuation direction
A simple field adjustment converts switch to
accept actuation from one or both directions. For
ready reference, adjustment instructions are cast
into the internal lid of side rotary heads.
Head orientation
The head may be orientated and locked in any of
four 90° positions.
Momentary action switches can be factory
assembled for operation in one direction only and/
or with the shaft facing the rear or either side.
Contact Honeywell for more information.
HEAVY DUTY LIMIT SWITCHES