HP 750 - Manual (Page 195)

Print Quality C4705-90000 9-17
AreaĆFill Diagnostic Plot (Service Test 15 ' page 8Ć35)
Objectives
Thisplot isintended to check the printĆquality performance when printing area fills. The plot
presents a worst case situation for the mainĆink media interaction problems:
1.
2.
3.
4.
SMEAR TEXT SMEAR TEXT SMEAR TEXT SMEAR TEXT
SMEAR TEXT SMEAR TEXT SMEAR TEXT SMEAR TEXT
SMEAR TEXT SMEAR TEXT SMEAR TEXT SMEAR TEXT
Print Modes
In this case, the print modes depend on the frontĆpanel settings, so that it is possible to verify
influence on printĆquality performance. It is possible to modify the print modes using the
following variables:
D printĆquality: Fast, Normal and Best. The number of carriage passes per swath depends
on the printĆquality and mediaĆtype settings.
D Lightness: Lighter, Normal or Darker. This reduces or increases the drop volume of the
cartridgesmodifying nozzle temperature.
D Dry time. Thisincreasesthe minimum time between swathsand before cutting which we
can find by printing in certain conditions(media & print mode).