HP 750 - Manual (Page 88)

Trailing-cable
connectors
Lift end-tabs to
release cables.
Do not strain cables.
1 Remove the window ' page 6Ć13.
2 Remove the center cover ' page 6Ć14.
3 Remove the electronicsĆenclosure
cover ' page 6Ć5.
4 Remove the left endcover ' page 6Ć16.
5 Remove the right endcover ' page 6Ć17.
6 Disconnect the trailingĆcable connector
from the main PCA, using needle nose
pliers.
7 Use needle nose pliers to disconnect the
trailingĆcable connectors from the
carriage PCA.
8 Remove the cable guide from the carriage
PCA by pulling the sides out to unclip
them and lifting the strip.
Reassembling: The connector will have
the lever up. Put the cable into the
connector. Lower the lever, making sure
that the cable is positioned correctly.
6-36 Removal and Replacement C4705-90000
Removing the Trailing Cable