HONDA BC4050 User Manual
Page 10
9.
Hook
the ends of the frame rod through the
eyes in the ends of the support rod.
SUPPORT ROD
Place the cover assembly over the cart support
tube. Be sure the latch handle is outside the
cover.
Insert
the
ends of the cover frame rod through
the holes in cart support tube.
Secure each end of the frame rod with a
3/8
inch flat washer and circle clip.
.
Inch
,FLAT
WASHER
CIRCLE C
U
P
SUPPORT TUBE
11. Attach the cover to the top of the support tube,
using the strap that is located next to the plastic
window.
Pull the strap over the
top
of the support tube,
around under
the support tube, then through
the slot
in the front of the cover.
12.
Attach the cover to the front corners of the cart
by pulling the elastic loops through the eyes
of
the straight rod and hooking the loops over the
cart bolts,
as
shown.
ELASTIC
LOOP
(2)
13.
Insert the
sleeve through the
opening in the front of the cover, and align the
two
mounting holes with the support tube.
Attach the connecting sleeve to the support
tube, using
two
x
inch pan-head
screws,
two
clamps, and
two
inch lock nuts.
Insert the screws from inside the connecting
sleeve. Install the nuts over the clamps. Tighten
the nuts securely.
\
\
SUPPORT
TUBE
Page
4