Page – HONDA BC4050 User Manual
Page 9
BAGGER CART
ASSEMBL Y
6.
Install the lift handles, using four
x
inch pan-head screws, four
1/4
inch
lock
washers, and four
1/4
inch nuts.
.
Tighten the nuts and screws securely.
LOCK WASHER
(4)
HANDLE
PAN-HEAD SCREW
7. Install the support tube, using four
5/16
x 1
inch hex bolts, two
5/16
inch
plastic spacers, and four
6
inch lock nuts.
Place the plastic spacers only
on
the upper
bolts, as shown.
Tighten the nuts and
bolts securely.
6 Inch
SUPPORT
x
inch
HEX
BOLT
(4)
FLAT WASHER
(4)
8.
Thread the three rods through the cover:
a.)
Thread the support rod through the support
rod sleeve as shown.
b.)
Thread the frame rod through the frame rod
sleeve as shown. Be sure to position the
frame rod so the washer is on the upper
side.
Washer on
upper
side
of rod
-
FRAME
ROD SLEEVE
c.) Thread the straight rod through the straight
rod sleeve as shown.
Page
3