Hach DR 5000 - Manual (Page 96)

96
Advanced Operations
5. According to the selected wavelength range, select the interval
from the actively displayed wavelength steps. In summery
maximally 780 measuring steps can be accomplished during a
Scan.
Note: The maximum wavelength adjusts automatically if the difference
between the maximum and minimum wavelength is not a multiple of
the interval.
6. Press OK to return to the scan mode. Selected parameters are
displayed along the graph‘s x-axis.
Select view (displaying table)
1. Press Select View in the Options menu after a reading is
taken.
2. A table with the results is displayed.
3. To return to the graph press Options and then View Graph.
Cursor mode
1. Press Cursor Mode: Track in the Options menu.
2. The selection for this menu item determines what data are
displayed in the table. Highlight Track or Peak/Valley.
3. Press OK to confirm.
4. Press Return to return to the scan mode.
Integral
The Integral applies to the whole wavelength range of the scan.
1. Press Integral: Off in the Options menu.
2. Highlight On to show the Integral. To find the integral of other
wavelength ranges, change the wavelength range and scan
again.
3. Press OK to confirm.