Hitachi DZMV230A - Manual (Page 102)

English
102
Message Cause & Troubleshooting
Reference
page
Cannot move scene in
program mode.
(1) Disc is not format-
ted. If it formats, it be-
comes possible to use
for camera.
(2) However, when you
record from PC con-
nection ter minal,
please do not format.
(3) Format the disc
now?
In DVD-R Disc, Video
mode of the disc re-
corded once cannot
be changed.
Finalize may not be
complete. Finalize
again now?
Disc error has oc-
curred. Finalizing is not
complete.
Scenes over limit. Can-
not move scenes.
Top scene cannot be
divided.
End scene cannot be
divided.
Photo cannot be di-
vided.
Cannot combine
scene.
Same scenes on Play
List will be deleted.
Delete scenes?
This disc is recorded by
the PAL system. Please
replace disc.
This disc cannot be
used. Please replace
disc.
Move was executed when a program was selected.
DVD-R disc that was not initialized for camera use was
inserted.
With DVD-R disc, the movie quality mode once used
for recording cannot be changed.
Instantaneous shutoff occurred during finalizing, after
which power was supplied and disc was inserted.
Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
An attempt was made to move a scene, even though
number of storable scenes was exceeded.
Division is not possible at the start of scene.
Division is not possible at the end of scene.
Still image cannot be divided.
Unless consecutive scenes are selected, they cannot
be combined.
This will appear when scenes are to be deleted.
This DVD video camera/recorder can use only discs
recorded on the NTSC system. A disc recorded on the
PAL system cannot be used on this DVD video cam-
era/recorder.
A disc that cannot be used on this DVD video cam-
era/recorder has been loaded. Check the type of disc.
—
23
80
83
83
83
84
68, 84
89
89
58
38
72