Hitachi DZMV230A - Manual (Page 31)

31
English
Charging Battery
Use the provided AC adapter to charge the battery.
1 Attach the battery pack to the DVD video cam-
era/recorder.
2 Connect the AC adapter between the DC IN 8.4V
jack on DVD video camera/recorder and an AC
outlet.
The CHARGE/ACCESS indicator will blink in
green and charging will start.
AC adapter
CHARGE/ACCESS
indicator
Power cable
● Battery pack charged status
You can realize the charged status of battery by checking the CHARGE/ACCESS indicator:
Charged status CHARGE/ACCESS indicator
0-50% Blinks once per 1-2 seconds
51-75% Blinks twice per 1-2 seconds
76% or more Blinks three times per 1-2 seconds
Fully charged Remains lit
Note: Charge the battery in the temperature
range of 50 °F - 86 °F (10 °C - 30 °C).
Note: Make sure that the battery is securely in-
stalled: Incomplete attachment could cause the
battery to fall and be damaged.
Note: If the power switch is set to “
VIDEO” or
“ PHOTO”, charging will not be performed.
Note: When connecting the power cable to the
DVD video camera/recorder, the pin of power
cable cannot be completely inserted into the DC
IN 8.4V jack, but this does not indicate a malfunc-
tion. Do not insert the power cable with undue
force: Doing so could result in malfunction.