Hitachi DZMV230A - Manual (Page 93)

English
93
1 Set the input selection
on the DVD video cam-
era/recorder to “LINE”.
Switch the input refer-
ring to “Input Selec-
tion” on page 59.
2 Turn on the connected device, and start play-
back of picture.
The picture will appear on the LCD screen or
viewfinder of this DVD video camera/recorder.
3 Press the REC button.
Recording will start on this DVD video camera/
recorder.
The operation of this line-input recording is the
same as for recording movie (video).
Recording Image from Other Camcorder or AV Device
Note: Still images can also be r ecorded on DVD-
RAM disc. See “Changing Method for Recording
Stills” on page 60 for details, and “Recording Stills”
on page 43 for how to record still images.
Note: The “Input Source” setting will return to
“CAMERA” whenever DVD video camera/re-
corder is turned off.
Note: Recording of most images is prohibited by
the copy-guard signal to protect the copyright,
except for images recorded on camcorders for
personal enjoyment. These images cannot be re-
corded on this DVD video camera/recorder:
Typical copyright protected images include those
of DVD video, LD, prerecorded videotape, rental
videotape, digital satellite broadcast, etc.
Note: If a video signal that cannot be read by
this DVD video camera/recorder is present - even
in images recorded on camcorder for personal en-
joyment without copy-guard signal - the input im-
age may not be recorded normally.
Note: If the input signal is interrupted by switch-
ing the channel on TV or switching the signal using
video selector, normal recording cannot be per-
formed.