Before using disc navigation, Disc navigation, All programs – Hitachi DZMV230A User Manual

Page 66

Advertising
background image

66

English

Before Using Disc Navigation

Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder.
Here is an explanation on “scene” and “program”, so that you will be able to make most use of Disc
Navigation function.

Structure of Data Recorded On This DVD Video Camera/Recorder

Video recorded using this DVD video camera/recorder will be stored on disc in units of scene, in the
order of recording.

•Movie:

One scene refers to images recorded between each press of the REC button until recording is
temporarily stopped by pressing REC again.

•Still:

One scene refers to a still recorded by pressing REC button.

The recorded scenes are collected as "programs" on each recording date.

Scenes of one program are lined up in the order of
recording. Usually, when the

button is pressed

immediately after recording, the last scene of the
last program on disc (scene ? of program No. 10
in the above diagram) will be played back.
To view previously recorded scenes (scenes 1->
in the above diagram), you can use the skip and
search playback functions to find any desired scene.
By using the Disc Navigation function, you can
easily find any desired scene, since you can specify
a program or a scene.
You can also fade the image recorded on the DVD
video camera/recorder, and rearrange the order of
scenes.

All programs

Program No. 1

Recorded on May 3, 2002

Program No. 10

Recorded on May 27, 2002

9:00AM

4:30PM

11:30AM

2:00PM

4:00PM

9:30PM

2:45PM

10:30AM

4:30PM

6:00PM

•••

Disc Navigation

This section explains about how to edit recorded images using the Disc Navigation function.

Note: Thumbnails (first images of recorded
scenes) are displayed from the top left of screen,
and up to 12 thumbnails can appear on one
screen. If there are 13 scenes or more recorded,
tilt down the joystick and hold it to display 13th
and any later scenes as thumbnails.
Note: “Scene No.” is not inherent to that scene,
but is a serial number of thumbnails being dis-
played. Therefore, the Scene No. when all pro-
grams are displayed may be different from that
for the same scene when a specific program is
displayed.
Note: Disc Navigation thumbnail screen, skip and
title attached to each scene, and special effects
(fade) are original functions of this DVD video cam-
era/recorder. They will not operate on devices
other than this DVD video camera/recorder.
Note: Even though thumbnails may not appear,
depending on the recording conditions, playback
of the images may be possible.

* Times on each scene show when recordings were started.
* Numbers
1? show the order in which recordings were made.

Scene

Thumbnails

Advertising
This manual is related to the following products: