Document Outline

• Title Page
• Preface
  • Compliance
  • Notices
  • Electrostatic Discharge (ESD) Precautions
  • Carrier Access Software License Agreement
    • License
    • Title and Risk
    • Copyright
    • Term
    • Warranty
    • Disclaimer
    • Limitation of Liability
    • Jurisdiction and Venue
  • Warranty
    • Limitations of Warranty & Limitation of Remedies
    • Warranty Product Returns
• Table of Contents
• 1. Introduction
  • Overview
  • Features and Benefits
  • Access Navigator Configurations
  • System Architecture
  • Carrier Access Support Products
    • Access Banks
    • Adit 600
  • Management
    • Command Line Interface
    • SNMP
    • Valet and NetworkValet EMS Software
• 2. Access Navigator / DCS Service Manager
  • Overview
  • System Architecture
  • Features and Benefits
    • Functions
    • Services
    • Facilities
    • Management
  • Configuration
  • Applications
  • Interfaces
  • Specifications
    • DCS Operation
    • DS1 Interface
    • System Clocking
    • Signaling
    • Management Interfaces
    • Protocols
    • Alarms
    • Compliance
    • Power
    • Environmental
    • Physical
  • Compliance Requirements
    • FCC Requirements
    • Telcordia (Bellcore) Requirements
    • UL Requirements
    • CSA Requirements
  • Ordering Information
• 3. Access Navigator / GR-303 + Data Host
  • Overview
  • System Architecture
  • Features and Benefits
  • GR-303 Services
  • DCS Services
  • Management Architecture
    • IP DS0 Management
    • FDL Management
  • Configuration
  • Applications
  • Interfaces
  • Specifications
    • GR-303 Operation
    • Crossconnects
    • DS1 Interface
    • System Clocking
    • GR-303 Signaling
    • DCS Signaling
    • Management Interfaces
    • Protocols
    • Alarms
    • Compliance
    • Power
    • Environmental
    • Physical
  • Compliance Requirements
    • FCC Requirements
    • Telcordia (Bellcore) Requirements
    • UL Requirements
    • CSA Requirements
  • Ordering Information
• 4. Access Navigator / GR-303 Host with P-Phone
  • Overview
  • System Architecture
  • Features and Benefits
  • GR-303 Services
  • P-Phone Services
  • DCS Services
  • Management Architecture
    • IP DS0 Management
    • FDL Management
  • Configuration
  • Applications
  • Interfaces
  • Specifications
    • GR-303 Operation
    • Crossconnects
    • DS1 Interface
    • System Clocking
    • GR-303 Signaling
    • DCS Signaling
    • Management Interfaces
    • Protocols
    • Alarms
    • Compliance
    • Standards
    • Power
    • Environmental
    • Physical
  • Compliance Requirements
    • FCC Requirements
    • Telcordia (Bellcore) Requirements
    • UL Requirements
    • CSA Requirements
  • Ordering Information
• 5. Physical Installation
  • Compliance and Safety Requirements
  • Tools and Materials
  • Unpacking and Inspection
  • Horizontal 19-Inch Rack Mount
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Attach Mounting Brackets to Access Navigator
    • Attach Access Navigator to Equipment Rack
  • Horizontal 23-Inch Rack Mount
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Attach Mounting Brackets to Access Navigator
    • Attach Access Navigator to Equipment Rack
  • Vertical Rack Mount Using Crossbars
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Install Crossbars
    • Attach Mounting Brackets to Access Navigator
    • Attach Access Navigator to Crossbars
  • Vertical Wall Mount
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Ensure Adequate Clearance
    • Prepare Plywood
    • Attach Mounting Brackets to Access Navigator
    • Attach Access Navigator to Plywood
• 6. Electrical Installation
  • Compliance and Safety Requirements
  • Static-Sensitive Equipment Handling Procedures
  • Tools and Materials Required
  • Chassis Ground Connection
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Run Ground Wire to Access Navigator
    • Connect Ground Wire to Ground Lug
    • Attach Ground Lug to Access Navigator
  • DSX-1 Cable Connections
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Prepare DSX-1 Cables
    • Connect DSX-1 Cables to Access Navigator
    • Connect DSX-1 Cables to Interface or Patch Panel
  • RS-232 Management Connection
    • Installation Summary
    • Precautions
    • Information, Tools, and Materials
    • Connect Shielded RS-232 Cable
    • Attach Ferrite Bead RF Suppressor
    • Preconfigure Optional Modem
  • Ethernet Management Connection
    • Installation Summary
    • Information and Materials
    • Make Ethernet Cable (Optional)
    • Connect Ethernet Cable to Access Navigator
    • Connect Ethernet Cable to Ethernet Hub
  • External Timing Source (BITS) Connection
    • Installation Summary
    • Tools and Materials
    • Make BITS Cable (Optional)
    • Connect BITS Cable
  • Alarm Output Connections
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Wire Alarm Output Connector
    • Plug Output Alarm Connector into Access Navigator
  • Alarm Input Connections
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Wire Alarm Input Connector
    • Plug Alarm Input Connector into Access Navigator
  • DC Power Connections
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Wire Power Connectors
    • Verify Wiring
    • Connect Power Plugs to Access Navigator
  • Dress Cables and Wires
    • Installation Summary
    • Tools and Materials
    • Dress Cables and Wires
  • Acceptance Test
    • Verification Summary
    • Apply Power and Verify Operation
    • Verify Chassis Ground Connection
    • Verify DSX-1 Connections
    • Verify RS-232 Management Connection
    • Verify Ethernet Cable Connection
    • Verify Ethernet Management Connection
    • Verify BITS Connection
    • Verify Alarm Output Connections
    • Verify Alarm Input Connections
    • Exit Management Session
  • Install Redundant Controller Card
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Verify Software Compatibility
    • Remove Front Cover
    • Install Controller Card
    • Verify Operation
  • Install Additional Quad T1 Framer Cards
    • Installation Summary
    • Precautions
    • Tools and Materials
    • Remove Front Cover
    • Install Quad T1 Framer Card
    • Verify Operation
    • Replace Front Cover
  • Configure Management Interfaces
    • Setup Summary
    • Start RS-232 Management Session
    • Set Date
    • Set Time
    • Set System ID or CLLI code
    • Set IP Address and Subnet Mask
    • Set Gateway Address
    • Exit Management Session
• 7. Start Management Session
  • Management Requirements
  • Command Line Interface Conventions
  • RS-232 Management
    • RS-232 Management Requirements
    • Procedure Summary
    • Obtain Information
    • Connect RS-232 Cable to Access Navigator
    • Set Up Terminal Program
    • Start RS-232 Management Session
    • Perform Management Operations
    • Exit RS-232 Management Session
  • Telnet Management
    • Telnet Management Requirements
    • Procedure Summary
    • Obtain Information
    • Start Telnet Program and Connect to Access Navigator
    • Start Telnet Management Session
    • Perform Management Operations
    • Exit Telnet Management Session When Finished
  • NetworkValet EMS and Valet Management
• 8. Provision Access Navigator
  • Basic Provisioning Overview
  • Basic Provisioning Quick Guide
  • Obtain Provisioning Information
  • Verify System Equipment Configuration
  • Set System ID or CLLI Code
  • Set Date
  • Set Time
  • Set Ethernet Properties
  • Set User and Password Security
  • Set SNMP Properties
• 9. Provision DCS Service
  • DCS Provisioning Overview
    • Provisioning ISDN BRI Service
    • Provisioning TR-08 Service with DCS
  • DCS Provisioning Quick Guide
  • Obtain Provisioning Information
  • Verify System Equipment Configuration
  • Verify Service Status
  • Set Unused Circuits Out of Service
  • Set System Clock Source
  • Provision “Groom” DS1 Circuits to Network
  • Test Groom DS1 Circuits
  • Provision “Drop” DS1 Circuits to Subscribers
  • Provision and Connect ISDN PRI Channels
  • Provision and Connect ISDN BRI 3DS0 Channels
  • Provision and Connect DS0s
  • Turn Up Service
  • Test DS1 and DS0 Circuits
• 10. Provision GR-303 Service
  • GR-303 Provisioning Overview
    • Provisioning ISDN BRI Service
    • Provisioning P-Phone Service
    • Provisioning TR-08 Service with GR-303 Translation
  • GR-303 Provisioning Quick Guide
  • Obtain Provisioning Information
  • Verify System Equipment Configuration
  • Verify Service Status
  • Set Unused Circuits Out of Service
  • Set System Switch Type
  • Set System Clock Source
  • Provision “Switch” DS1s to Interface Group
  • Assign Primary and Secondary EOC
  • Assign Primary and Secondary TMC
  • Test DS1 Circuits
  • Provision “Drop” DS1 Circuits to Subscriber
  • Provision ISDN BRI 4:1 TDM Service to Subscribers
  • Provision DS0s to Subscribers
  • Assign Call Reference Values (CRVs)
  • Turn Up Service
  • Test Circuits
• 11. Provision Remote Access Bank II
  • Remote Access Bank II Provisioning Overview
    • Pre-Provisioning and Testing
    • Requirements
    • Analog Interfaces
    • Crossconnect Features
    • FX Analog Interfaces
    • Fractional Interfaces
    • Remote Interfaces
  • Remote Access Bank II Provisioning Quick Guide
  • Remote Access Bank II Maintenance Quick Guide
  • Obtain Provisioning Information
  • Verify System Equipment Configuration
  • Temporarily Disable Configuration Downloading
  • Provision Drop DS1 to Remote Access Bank II
  • Test DS1 Circuits
  • Provision DS0s
  • Provision DS0 Crossconnects
  • Create Fractional Interfaces (if required)
  • Configure Remote RS-232 Interface (if used)
  • Configure Remote T1 Drop Interface (if used)
  • Configure Remote V.35 Interface (if used)
  • Connect Fractional Interface to Remote Interface
  • Download Configuration to Remote Access Bank II
  • Verify Downloaded Settings (optional)
  • Turn Up Service
  • Test Remote Circuits
• 12. Provision Remote Adit 600 via FDL
  • Remote Adit 600 FDL Provisioning Overview
    • FDL Management Configuration
  • Remote Adit 600 FDL Provisioning Quick Guide
  • Obtain Provisioning Information
  • Verify Equipment Configuration
  • Provision Drop DS1s to Remote Adit 600
  • Provision Drop DS0s
  • Provision DS0 Crossconnects (if required)
  • Provision Remote Adit 600
  • Test DS1 and DS0 Circuits
• 13. Provision Remote Adit 600 via IP DS0
  • Remote IP DS0 Provisioning Overview
    • IP DS0 Management Configuration
  • Remote IP DS0 Provisioning Quick Guide
  • Router Provisioning Quick Guide
  • Remote Adit IP DS0 Provisioning Quick Guide
  • Obtain Provisioning Information
  • Verify Equipment Configuration
  • Provision Groom DS1s to Adit Router
  • Provision Drop DS1s to Remote Adit
  • Provision Groom DS0s to Adit Router
  • Provision Drop DS0s to Remote Adit
  • Provision DS0 Crossconnects
  • Provision Remote Adit 600
  • Test DS1 and DS0 Circuits
• 14. Alarm Clearing
  • Identify Alarm Clearing Procedure
  • Clear Alarms - FDL
  • Clear Alarms - EOC
  • Clear Alarms - SNMP
  • Clear Alarms - Status Indicators
    • Power Status LEDs
    • Active/Standby Controller Status LEDs
    • Critical Alarm Status LEDs
    • Major Alarm Status LEDs
    • Minor Alarm Status LEDs
    • Alarm Cutoff (ACO) Status LED
    • DS1 Status LEDs
    • Ethernet Link Status LED
• 15. Diagnostics & Troubleshooting
  • Alarms and Logs
    • Operations Interface
    • Alarms
    • Alarm Reporting
    • Alarm Testing
    • Alarm and Status Indicators
    • Facility Alarm System
    • Alarm Cutoff (ACO)
    • Alarm Signaling - Red, Yellow (RAI), Blue (AIS)
    • DS1 Failures
    • Event Log
    • Configuration Change Log
    • BERT Log
    • TMC Log
  • Alarm and Status Indicators
    • Indicator Locations
    • Indicator Descriptions
  • Status and Performance
    • Status Clock
    • Status DS0
    • Status DS1
    • Status DS1 All
    • Status DS1 Performance
    • Status DS1 Performance History
    • Clear DS1 Performance
    • Status Equipment
    • Status IP
    • Status Remote
  • GR-303 Status and Performance
    • Status CRV
    • Status ISDN CRV
    • Status EOC
    • Status TMC
    • Status TMC History
    • Clear Blocked Call Count
    • Clear Peak Call Count
    • Clear Permanent Call Count
    • Set CRV Idle
  • Near-End Loopbacks
    • DS1 Loopdetect
    • DS1 FDL Protocol
    • DS1 Line Loopback
    • DS1 Payload Loopback
  • Far-End Loopbacks
    • DS1 CSU Loopup
    • DS1 Line Loopup
    • DS1 Network Loopup
    • DS1 NIU Loopup
    • DS1 Payload Loopup
  • Access Bank II Loopbacks
    • Read Remote Loopback
    • Send Remote Loopdown
    • Send Remote RS232 Line Loopup
    • Send Remote RS232 TSI Equipment Loopup
    • Send Remote RS232 TSI Network Loopup
    • Send Remote SDSL Payload Loopup
    • Send Remote T1 Payload Loopup
    • Send Remote T1 TSI Loopup
    • Send Remote T1 Drop Line Loopup
    • Send Remote T1 Drop Payload Loopup
    • Send Remote T1 Drop Payload Loopup
    • Send Remote V35 Line Loopup
    • Send Remote V35 TSI Equipment Loopup
    • Send Remote V35 TSI Network Loopup
  • Bit Patterns and Error Tests
    • Send DS1 (Pattern) Off
    • Send DS1 Line Pattern
    • Send DS1 Payload Pattern
    • Send DS1 Line Pattern with BER Test
    • Send DS1 Payload Pattern with BER Test
  • Other Maintenance Commands
  • Technical Support
• 16. Maintenance Procedures
  • Compliance and Safety Requirements
  • Repair and Return Procedure
  • Replace Controller Card
    • Procedure Summary
    • Overview
    • Precautions
    • Tools and Materials Required
    • Verify Equipment Status
    • Determine Which Replacement Procedure to Use
    • Replace Protected Controller Card
    • Replace Unprotected Controller Card
  • Replace Quad T1 Framer Card
  • Install SIMM on Controller Card
• 17. Update Controller Card Software
  • Overview
    • Download Procedures
  • Update Software via TFTP (Two Controllers)
    • Procedure Summary
    • Overview
    • Precautions
    • Information and Materials Required
    • Install Optional TFTP Server Software
    • Verify Equipment Status
    • Verify IP Connectivity
    • Upload Configuration
    • Download Software
    • Download Configuration
  • Update Software via Xmodem (Two Controllers)
    • Procedure Summary
    • Overview
    • Precautions
    • Information and Materials Required
    • Verify Equipment Status
    • Download Software
  • Update Software via Xmodem (One Controller)
    • Procedure Summary
    • Overview
    • Precautions
    • Information and Materials Required
    • Verify Equipment Status
    • Download Software
• 18. CLI Language Reference
  • Overview
  • CLI Requirements
    • CLI over RS-232
    • CLI over Telnet
    • Using CLI Command Scripts
  • CLI Conventions and Shortcuts
    • Command Categories
    • Commands, Confirmations, and Error Messages
    • Text Conventions
    • Command Syntax Descriptions
    • Entering DS1 and DS0 Numbers and Ranges
    • Command Shortcuts (Tabbing)
    • Keyboard Shortcuts
  • Online Help
    • Help System Overview
    • Displaying Basic Commands
    • Context Sensitive Help
    • Printing the Help File
  • Users and Passwords
    • Administration
    • Access Levels
    • Managing Users
  • Logging In and Out
    • Startup Message
    • Login with No User Name Required
    • Login with User Name Required
    • Login with No Password Required
    • Login with Password Required
    • Logout (Exit)
    • Autoexit (CLI Session Timeout)
  • CLI Command List
    • ACO
    • Add Interface
    • Add User
    • Alarms
    • Clear BERT Log
    • Clear Blocked Call Count
    • Clear Config Log
    • Clear DS1 Performance
    • Clear Log
    • Clear Peak Call Count
    • Clear Permanent Call Count
    • Clear Remote Log
    • Clear TMC Log
    • Connect
    • Connect Remote Interface
    • Delete Interface
    • Delete User
    • Disconnect
    • Disconnect Remote
    • Exit
    • Exit Remote Session (Ctrl+C)
    • Load
    • Load TFTP Config
    • Log
    • Log BERT
    • Log Config
    • Log TMC
    • Logon Remote
    • Ping
    • Read Remote Alarms
    • Read Remote Connections
    • Read Remote Log
    • Read Remote Loopback
    • Read Remote RS232
    • Read Remote Performance
    • Read Remote T1
    • Read Remote T1drop
    • Read Remote V35
    • Reset All
    • Reset DS1 Framer
    • Reset Remote
    • Reset Standby
    • Restore Defaults
    • Send DS1 CSU Loopup
    • Send DS1 Line Loopup
    • Send DS1 Line <pattern>
    • Send DS1 Line <pattern> Test
    • Send DS1 Network Loopup
    • Send DS1 NIU Loopup
    • Send DS1 Payload Loopup
    • Send DS1 Payload <pattern>
    • Send DS1 Payload <pattern> Test
    • Send DS1 Off
    • Send Remote Loopdown
    • Send Remote RS232 Line Loopup
    • Send Remote RS232 TSI Loopup
    • Send Remote SDSL Payload Loopup
    • Send Remote T1 Payload Loopup
    • Send Remote T1 TSI Loopup
    • Send Remote T1Drop Line Loopup
    • Send Remote T1Drop Payload Loopup
    • Send Remote T1Drop TSI Loopup
    • Send Remote V35 Line Loopup
    • Send Remote V35 TSI Loopup
    • Send Switch Provision Request
    • Set Alarms
    • Set Autoexit
    • Set Clock
    • Set CRV Idle
    • Set Date
    • Set DS0 CRV
    • Set DS0 ISDN BRI CRV
    • Set DS0 P-Phone
    • Set DS0 Service
    • Set DS0 Signal
    • Set DS0 Type
    • Set DS1 Clock
    • Set DS1 FDL
    • Set DS1 Framing
    • Set DS1 ID
    • Set DS1 LBO
    • Set DS1 Line Loopup
    • Set DS1 Linecode
    • Set DS1 Loopdetect
    • Set DS1 Payload Loopup
    • Set DS1 Remote Device Mgmt
    • Set DS1 Service
    • Set DS1 TermID
    • Set DS1 Threshold
    • Set DS1 Type
    • Set EOC
    • Set Ethernet IP Address
    • Set ID
    • Set IP Gateway Address
    • Set Remote Config
    • Set Remote ID
    • Set Remote RS232 Baud
    • Set Remote RS232 Data
    • Set Remote RS232 Stop
    • Set Remote T1Drop Framing
    • Set Remote T1Drop LBO
    • Set Remote T1Drop Linecode
    • Set Remote T1Drop PRM
    • Set Remote V35 ClockInv
    • Set Remote V35 CTS
    • Set Remote V35 Data
    • Set Remote V35 DSU
    • Set Remote V35 RxClock
    • Set Remote V35 Speed
    • Set Screen
    • Set SNMP Contact
    • Set SNMP GetCom
    • Set SNMP Location
    • Set SNMP Name
    • Set SNMP NMS Address
    • Set SNMP SetCom
    • Set SNMP TrapCom
    • Set Switch Type
    • Set Time
    • Set TMC
    • Set User Level
    • Set User Password
    • Show Autoexit
    • Show Clock
    • Show Connect
    • Show CRV
    • Show Date
    • Show DS0
    • Show DS1
    • Show DS1 All
    • Show EOC
    • Show Ethernet
    • Show ID
    • Show Interface
    • Show IP
    • Show ISDN CRV
    • Show Remote
    • Show Remote Connections
    • Show SNMP
    • Show Switch
    • Show Time
    • Show TMC
    • Show Users
    • Status Clock
    • Status CRV
    • Status DS0
    • Status DS1
    • Status DS1 All
    • Status DS1 Performance
    • Status DS1 Performance History
    • Status EOC
    • Status Equipment
    • Status IP
    • Status ISDN CRV
    • Status Remote
    • Status TMC
    • Status TMC History
    • Switch Controller
    • Upload TFTP Config
    • WhoAmI
• A. EOC Interface
  • Overview
  • Managed Object Class Support
    • Analog Line Termination Objects
    • Alarm Count List Objects
    • DS0 Channel Termination Objects
    • DS1 Framed Path Termination Objects
    • DS1 Line Termination Objects
    • EBS Line Termination Objects
    • ISDN Line Termination Objects
    • ISDN Framed Path Termination Objects
    • Quarter DS0 Channel Termination
    • Crossconnection
    • Equipment Objects
    • IDLC Call Processing Profile Objects
    • IDLC Data Link Profile Objects
    • IDLC Data Link Termination Objects
    • IDLC Terminal Objects
    • Memory Objects
    • Network Element Objects
    • Protection Group Objects
    • Protection Group Unit Objects
  • Actions
  • Notifications
• B. FDL Interface
  • Overview
  • Remote Provisioning Requirements
    • Access Navigator Remote Provisioning Requirements
    • Access Bank II Remote Provisioning Requirements
    • Adit 600 TDM Remote Provisioning Requirements
  • Remote Provisioning Capabilities
    • Access Bank II Capabilities
• C. SNMP Interface
  • Overview
  • Carrier Access Enterprise MIB
  • SNMP Basics
    • MIB Structure
    • MIB Tables
    • Managing Networks
    • SNMP Protocols
    • SNMP Requirements
  • SNMP Trap Reports
• Glossary
  • Abbreviations/Acronyms
  • Definitions
• Index