Carrier Access Access Navigator - Manual (Page 624)

18-168 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Status Equipment
Purpose: Displays the status of all cards installed in the Access Navigator. Adding the optional
parameter “all” will display the complete versions of the system software components,
as shown in the example on the next page.
Security: Level 3 (monitor)
Syntax: status equipment [all]
Example: status equipment
Message:
Equipment Status Version
--------- ------ -------
Controller A Active 01.77 GR-303 Option
Controller B Standby 01.77 GR-303 Option
DS1 Card 1 Installed 1
DS1 Card 2 Installed 1
DS1 Card 3 Installed 1
DS1 Card 4 Installed 1
DS1 Card 5 Installed 1
DS1 Card 6 Installed 1
DS1 Card 7 Card not installed 1
DS1 Card 8 Card not installed 1
Description:
Item Description
Equipment Lists card type and card slot.
Controller - Slots A and B only.
DS1 Card - Slots 1 through 8 only.
Status Active - The Controller card is active.
Standby - The Controller card is in standby.
Unknown - Card installed but not responding.
Installed - Card installed.
Card Not Installed – Empty card slot.
Card Failed - transient message indicating standby
Controller failed software update and will reboot.
Version Controller - Firmware version number plus software options
such as GR-303 or GR-303 P-Phone.
DS1 Card - Version number of card.