Ferris Industries IS4500ZC28D61CE - Manual (Page 48)

LC-6
Lawn Care & Mowing Information
Stepped Cutting
Stepped cutting is sharp ridges or uneven levels left in
the lawn surface. Stepped cutting is usually caused by
mower deck damage or misadjustment, or damage to
mower blades.
CAUSE SOLUTION
Deck is not leveled correctly Level the deck correctly
Tires are not properly inflated Check and inflate the tires
Blades are damaged Replace the blades
Deck shell is damaged Repair or replace the deck
Mower spindle is bent or loose Repair or replace the spindle
Blades are installed incorrectly Reinstall the blades correctly