Frymaster 2424G - Manual (Page 49)

24G SERIES FLATBOTTOM GAS FRYERS
CHAPTER 2: PARTS LIST
2-5
ITEM PART # COMPONENT
1 Back, Single Fryer Cabinet
200-1608 Standard 1824G
(for 2424G, use 200-1500)
210-3006 Short Flue 1824G (for 2424G, use 200-2005)
2 Panel, Left Side
823-3459 Stainless Steel
823-4349 Painted Mild Steel
823-3490 Filter-Ready Add-On Fryer
3 Panel, Right Side
823-3489 Stainless Steel
823-4350 Painted Mild Steel
823-3491 Filter-Ready Add-On Fryer
3a 210-2977 Cover, Side Panel Access
4 210-1534 Rail, 1824G Cabinet Back Support (for 2424G, use Item 13) older units
5 200-2903 Channel, 1824G Front and Rear Base
6 823-4063 Support, Caster
7 Caster, 5-inch with Brake Swivel
810-0357 4-Hole Bolt Pattern
810-2405 Single Stud
8 Caster, 5-inch without Brake Swivel
810-0356 4-Hole Bolt Pattern (for fryers with legs in front, use 810-0378 Rigid Caster)
810-2406 Single Stud
* 810-2053 Leg, 6-inch Adjustable
* 826-1468 Kit, Shim Caster (contains 8 shims)
* 900-2949 Shims, Caster 14 gauge
9 200-1378 Bracket, Drain Nipple Storage
10 200-4511 Hinge, Universal Door (for filter-ready units, use 200-1675)
11 Back, Lower Cabinet
200-4154 Units with Built-in Filtration
200-4153 1824G Units without Built-in Filtration (for 2424G, use 200-4152)
12 200-4151 Back, 1824G Upper Cabinet (for 2424G, use 200-4150)
* 200-1607 Back, 2424G One-Piece
(used on UFF units built before February 2003 only)
13 210-1406 Rail, 2424G Cabinet Back Support (for 1824G, use Item 4) older units
14 823-3581 Panel, Inner Cabinet (Left)
15 823-3582 Panel, Inner Cabinet (Right)
16 200-2632 Support, Inner Cabinet Panel Front
17 200-2624 Upright, Cabinet Rear
18 823-4149 Support, Flue
19 200-5210 Bridge, Filter Base
20 200-2717 Support, Filter Pump Motor
21 200-2643 Base, Filter
22 200-3356 Cover, Filter Base
23 200-5209 Brace, 2424G Rear Cross
24 200-4696 Channel, 2424G Left or Right Base
25 823-4064 Channel, Leg/Caster Support
26 810-1365 Caster with Brake, 3-inch Adjustable
27 106-2837SP Bracket, Filter Retainer
* Not illustrated.