Fitness Quest 284 - Manual (Page 6)

5
Tools Required (included):
M5 Allen Wrench
Multi Hex Tool with Phillips Screwdriver
Wrench
NOTE: All location references, such as front, rear, left or right,
made in these instructions are from the user being
on the unit and facing forward.
ASSEMBLY INSTRUCTIONS
Occasionally our products contain components that are pre-lubricated at the factory. We recommend
that you protect flooring, or anything else the parts may contact, with newspaper or cloth.
IMPORTANT
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.
STEP 2 – Foot Pedal Installation
Thread Shafts of Pedals Right and Left into
Crank and tighten with wrench.
Note: Pedals are marked Right and Left. Right
Pedal threads clockwise, Left Pedal threads
counter clockwise.
STEP 1 – Rear Foot Tube Installation
Attach the two 3/8” x 70mm Carriage Bolts,
3/8” Curved Washers and 3/8” Acorn Nuts
to the Rear Foot Tube.
Note: Make sure indentations face down
on Rear Foot Tube.
Figure 1 - Install Rear Foot Tube
Figure 2 - Install Foot Pedals
3/8”
acorn
nut
3/8”
curved
washer
rear
foot tube
3/8” x 70mm
carriage bolt
right pedal
with strap
left pedal
with strap
shaft
shaft
crank