Fitness Quest 284 - Manual (Page 9)

8
Assembly is now complete.
IMPORTANT:
Please read page 9 before beginning your
workout for important instructions on how
to use your Recumbent Bike.
STEP 7 – Battery Installation
a) Remove Battery Door from back of Console,
and insert (4) “C” Batteries and replace the
Battery Door.
Note: DO NOT use rechargeable batteries,
doing so will cause a short circuit and
destroy the computer.
Figure 7 - Install Batteries
Figure 8 - Adjusting the Seat
STEP 8 – Seat Adjustment
To adjust the seat, turn the Seat Adjustment Knob
counter clockwise, pull Knob down and slide into
one of the four positions. Make sure Knob pops
into place and tighten.
Note: It may be easier to adjust the seat
while standing beside your unit.
console
seat adjustment
knob
battery
door