Fitness Quest 284 - Manual (Page 7)

6
STEP 4 – Handlebar Installation
a) Attach Handlebar to Seat Adjustment
Tube under Seat with the two Assembly
Knobs. Place Knob Caps on threaded
end of Knobs.
Note: Do not pinch the wires.
b) Attach Handlebar Pulse Wire to Long
Extension Wire coming from the Frame.
STEP 3 – Back Support Frame
Tube Installation
a) Attach Back Support Frame Tube to Seat
Adjustment Tube with 3/8” x 135mm Hex
Bolt and 3/8” Nylon Nut.
b) Lay bike on its side and attach two M8 x 30mm
Allen Bolts and two M8 Washers to the underside
of the bottom Seat Cushion.
Figure 4- Install Handlebar
Figure 3a - Install Back Support Frame Tube
Figure 3b - Attach Bolts and Washers to
the bottom of the Seat Cushion
seat
adjustment
tube
assembly
knob
handlebar
knob
cap
long
extension wire
handlebar
pulse
wire
frame
back support
frame tube
3/8”
nylon
nut
seat adjustment
tube
3/8” x 135mm
hex bolt
M8 x 30mm
allen bolts
M8 washer
M8 washer
seat
cushion