FUJITSU 560H - Manual (Page 12)

560H Series Connector Conforming to Ver. 4
12
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Part number: FCN-565P068-G/0442-E4 (with FG clip)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
5 (0.197)
0.51 (0.020)
2- ш 2.6
3 (0.118)
1.905 (0.075)
3.810 (0.150) 5.715 (0.225)
6 (0.236)
11.2 (0.441) 35.2 (1.386)
2.42 (0.095)
76.31 (3.00) 79.3 (3.12) 86.31 (3.40)
4.8 (0.189)
7.8 (0.307)
1.2 (0.047)
8.5
(0.335)
2- ш 2.35 (0.0925) 2- ш 4 (0.157) 2- ш 6 (0.236)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
R4
12.9
10 (0.394)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339)
57.51 (2.26)
22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339) 22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
2- ø 2.6
11.2 (0.441) 35.2 (1.386)
2.42
(0.095)
76.31 (3.00) 79.3 (3.12) 86.31 (3.40)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
0.77 (When a card is ejected) 8.07 (When a card is inserted)
R4
12.9
10 (0.394)
5 (0.197)
0.51 (0.020)
3 (0.118)
1.905 (0.075)
3.810 (0.150) 5.715 (0.225)
6 (0.236)
4.8 (0.189)
1.2 (0.047)
8.5
(0.335)
2- ш 2.35 (0.0925)
2- ш 4 (0.157) 2- ш 6 (0.236)
0.77 (When a card is ejected) 8.07 (When a card is inserted)
Component mounting is prohibited in the
hatched areas. ∗ 2.
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) Ч (68/2–1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
61.7 (2.43) –0
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
76.31 (3.0)
±0.1 (0.0039)
7.8 (0.307)
±0.1 (0.0039)
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ш 4.5 (0.177)
+0.2 (0.0079)
–0
2- ш 8 (0.315)
–0
22 (0.866) ±0.1 (0.0039)
34 (1.339) ±0.1 (0.0039)
57.15 (2.25) ±0.1 (0.0039)
2- ш 2 (0.079)
±0.1 (0.0039)
5.715 (0.225)
±0.05 (0.0020
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ш 3.5 (0.138)
±0.1 (0.0039)
2- ш 3.5 (0.138)
±0.1 (0.0039)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) Ч (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
61.7 (2.43) –0
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ш 4.5 (0.177)
+0.2 (0.0079) –0
2- ш 8 (0.315)
–0
22 (0.866)
±0.1 (0.0039) 34 (1.339)
±0.1 (0.0039)
76.31 (3.0)
±0.1 (0.0039)
∗ 2.
∗ 2.
Component mounting is prohibited in the
hatched areas. ∗ 2.
68- ш 1 (0.039)
±0.05 (0.0020)
68- ш 1 (0.039)
±0.05 (0.0020)
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is
used) to mount the connector to the board.
Unit: mm (in.)
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS