FUJITSU 560H - Manual (Page 5)

560H Series Connector Conforming to Ver. 4
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/A-V4
3 (0.118) 4.5 (0.177)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
50.8 (2)
1.27 (0.05) Ч (34–1) = 41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
2.42 (0.095)
35.2 (1.39)
2- ш 2.8 (0.110)
1.27 (0.05) Ч (34–1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
3 (0.118)
No.1 No.17 No.34
No.68 No.51 No.35
2.5mm (0.098)
deep spot facing
5.715 (0.225) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
2- ш 2.8 (0.110) ±0.1 (0.0039)
68- ш 1 (0.039) ±0.05 (0.0020)
1.27 (0.05)
50.8 (2) ±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05) Ч (68/2-1) =
41.91 (1.65) ±0.1 (0.0039)
No.35
No.1
No.68
No.34
6.7 (0.264)
±0
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P136-G/0-V4
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075)
× (8-1) = 13.335 (0.525)
35.2 (1.39)
11.2 (0.441)
2.42 (0.095)
59.7 (2.35)
50.8 (2)
11 (0.433)
3
(0.118)
4 (0.157)
No.35
No.1
No.35
No.1
No.34
No.68
No.34
No.68
1.905 (0.075) ±0.05 (0.0020)
No.35
No.1
1.905 (0.075)
×
(8-1)
= 13.335 (0.525)
No.1
No.35
±0.1 (0.0039) 50.8 (2)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.34
No.68
No.34
No.68
±0.05 (0.0020)
2- ш 2.8 (0.110) ±0.1 (0.0039)
136- ш 1 (0.039) ±0.05 (0.0020)