FUJITSU 560H - Manual (Page 9)

560H Series Connector Conforming to Ver. 4
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Unit: mm (in.)
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
2.5
7 (0.276)
0.51 (0.020) 1.905 (0.075) 3.810 (0.15) 5.715 (0.225) 35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
4.8 (0.189)
42 (1.654)
35.5 (1.398)
7 (0.276)
1 (0.039)
2.5mm (0.098)
deep spot facing
59 (2.323)
2.1 (0.083) 4 (0.157)
No.68 No.35
No.1 No.34
ø 2.8 (0.110)
When a card is ejected
When a card is inserted
5 (0.197)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) ■ MOUNTING EXAMPLE
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.34
No.1
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
Ejector button
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
No.35
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Nut buried