Fujitsu Siemens Computers X103 SFF - Manual (Page 19)

Preparing for use
VFY-SCED103S, edition 1 11
Switching on monitor and device
► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
1
► Press the ON/OFF switch on the front of
the device.
The power-on indicator lights green and the
device is started.
1 = ON/OFF switch
Installing the software
► During installation, follow the instructions on screen.
► Consult the operating system manual if there is anything unclear about the requested input
data.
i
You will find further information about the system, drivers, utilities, and updates on the
"Drivers & Utilities" CD supplied.
Connecting external devices
!
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs before connecting
external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting cables
►
Turn off all power and equipment switches.
► Remove all power plugs from the grounded mains outlets.
► Plug all cables into the device and peripherals. You must observe the information provided in
the "Important notes" chapter.
► Plug all data communication cables into the utility sockets.
► Plug all power cables into the grounded mains outlets.