Fujitsu Siemens Computers X103 SFF - Manual (Page 20)

12 VFY-SCED103S, edition 1
Disconnecting cables
►
Turn off all power and equipment switches.
► Remove all power plugs from the grounded mains outlets.
► Unplug all data communication cables from the utility sockets.
► Unplug all cables from the device and peripherals.
i
USB devices are hot-pluggable. This means you can connect and disconnect devices
while your operating system is running.
Additional information can be found in the "Connecting external devices to the USB ports"
section and in the documentation for the USB devices.
Ports provided by the device
The connections are located on the front and back of the device. The ports available on your device
depend on the configuration level you have selected. The standard ports are marked with the
symbols shown below (or similar). Detailed information on the location of the connections is provided
in the manual for the mainboard.
Keyboard port, purple PS/2 mouse port, green
1
Serial port 1, teal or turquoise
2
Serial port 2, teal or turquoise
Monitor port, blue Parallel port/Printer, burgundy
Headphones port, orange or light
green (optional) Microphone connector, pink (optional)
Audio output (Line out), light green Audio input (Line in), light blue
Game port, gold
SCSI connection
USB - Universal Serial Bus, black LAN
LAN port
DVI interface (optional)
Firewire (optional)
i
Some of the connected devices require special drivers (see the documentation for the
connected device).