Fujitsu Siemens Computers X103 SFF - Manual (Page 42)

System expansions
34 VFY-SCED103S, edition 1
Extensions to the mainboard
Details on whether you can upgrade the main memory or the processor of your device are provided
in the manual for the mainboard. In order to gain access to the components, you may need to
remove the cross-beam.
Making changes on mainboard
► Open the casing (see "Opening the casing").
► Remove the cross-beam (see "Removing the cross-piece").
► If necessary, remove the drive cage (see "Removing the drive cage").
Upgrading main memory
►
Upgrade the memory as it is described in the manual for the mainboard.
Replacing the processor
►
Replace the processor as it is described in the manual for the mainboard.
Replacing lithium battery
In order to permanently save the system information, a lithium battery is installed to provide the
CMOS-memory with a current. A corresponding error message notifies the user when the charge is
too low or the battery is empty. The lithium battery must then be replaced.
!
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Make sure that you insert the battery the right way round: The plus pole must be on the
top!