FOCUS Enhancements MANL-0823-01 - Manual (Page 12)

Chapter 1 Getting Started
2
CommandPost
REQUIREMENTS
Basic Requirements
• FOCUS Enhancements CommandPost controller
hardware
• Standard USB cable (provided in package)
• Monitor and display card capable of 800 x 600 dpi
resolution
Macintosh Requirements
• PowerPC Macintosh with built in USB port or PCI
USB card
CommandPost does not work with a USB serial
adapter
• Mac OS version 8.6 or later
• Minimum 10 MBs of available system memory to run
the CommandPost application. The CommandPost
extension requires less than 1 MB of RAM.
• Minimum 5 MBs of available hard disk space
Windows Requirements
• Windows 98, Windows 2000 or Windows ME.
• 486/DX66 or higher with built in USB port or PCI USB
card (Windows98)
• Pentium 133 or higher with built in USB port or PCI
USB card (Windows2000)
• Pentium 150 or higher with built in USB port or PCI
USB card (Windows ME)
• Minimum 2 MB RAM for CommandPost application
and 500KB for driver software
• Minimum 8MB of hard disk space