FOCUS Enhancements MANL-0823-01 - Manual (Page 49)

Focus CommandPost Setting Preferences
User Guide
33
CommandPost Control Active
Select this option to make the CommandPost controller
active. Deselect the option to deactivate the controller
buttons and other components.
If you deactivate the controller, then reactivate it with a
different controller plugged in than originally cali-
brated, you must re-calibrate the unit. To do this, press
the
Recalibrate button (located at the bottom of the
Preferences dialog) or the Edit|Recalibrate command
to recalibrate the joystick. See “Recalibrating the Joy-
stick and T-BAR.” beginning on page 36 for further
instructions.
Assign mouse click to button
You’ve already learned that you can emulate your
mouse button by pressing down on the joystick. If you
find this cumbersome or difficult to do, you can assign
controller buttons to represent single and/or double
mouse clicks.
To use this feature:
1. Select the Assign mouse click to button option.
2. Select the button you want to assign to a mouse
click.
3. Select a button or action as follows:
a. On Macintosh , select Single Click to have the but-
ton represent a single mouse click, or select Dou-
ble Click to have it represent a double-click.
b. On Windows , select the mouse button you want
to assign— Left , Middle , or Right . You can assign
only a single click to this action.
The selected button will now feature a circular indica-
tor on the Controller Options graphic. Is is not possible
to program the particular button once it is assigned to
a mouse click.