FOCUS Enhancements MANL-0823-01 - Manual (Page 50)

Chapter 3 Other Operations
34
CommandPost
Press joystick for mouse
Use this option to specify the result of pressing down
on the joystick. You have slightly different options for
Macintosh and Windows.
On Macintosh :
If you select Single Click , you must press down twice
in succession to enter a double-click action.
If you select Double Click , you cannot enter a single
click action using the joystick—you must use the
mouse button for this action.
On Windows :
Select the mouse button you want to assign to the
mouse click—
Left , Middle , or Right . You can assign
only a single click to this action.
Joystick sensitivity
This slider controls the speed at which the mouse
pointer travels on the screen relative to moving the joy-
stick. If you select
Max , the pointer moves at maximum
speed.
Jog wheel sensitivity
Provides the same functionality as Joystick sensitivity
(described above) but is relative to the Jog wheel.
Recalibrate
Click to recalibrate the joystick. See “Recalibrating the
Joystick and T-BAR.” on page 36 for further
information.
Recalibrating the joystick and T-bar is not normally
necessary during normal use. However, if you replace
your current CommandPost controller with a different
unit you should use this recalibration feature.