FOCUS Enhancements MANL-0823-01 - Manual (Page 52)

Chapter 3 Other Operations
36
CommandPost
RECALIBRATING THE JOYSTICK AND T-BAR.
You might find it necessary at some time or another to
recalibrate the joystick on the CommandPost control-
ler. This must be done when the CommandPost is first
installed on Macintosh and Windows systems.
If the mouse pointer moves erratically or fails to move
at all, it might require recalibration.
To recalibrate the joystick:
1. Working in the CommandPost application, choose
Edit|Recalibrate , or choose Edit|Preferences and
click the Recalibrate button at the bottom of the Pref-
erences dialog. If the CommandPost software exten-
sion is properly and currently loaded in memory,
the following dialog appears.
2. Rotate the joystick around its entire perimeter at
least one time. You will then be asked to do the
same with the Take Bar.
3. Click Done .
Note
When you first load CommandPost, you will be
prompted to calibrate the joystick and T-bar
directly after re-boot.