FOCUS Enhancements MANL-0823-01 - Manual (Page 34)

Chapter 2 Using CommandPost
22
CommandPost
1. Choose the keyset you want to use from the Keyset
Name menu.
2. Select the component you want to program in the
Controller Options section or the Trigger/Function
Name list.
To program one of the buttons, click the one you
want to select. CommandPost displays a green glow
around that object.
To program the Takebar or Jog/Shuttle wheel, click
the corresponding image in the Controller Options
section. CommandPost displays a large image of the
component.
CommandPost highlights the selected key (or, trig-
ger) in the Trigger/Functions List. In this case, Key 1 is
selected and highlighted.
3. Click inside the Function Name box and enter a name
for the function you want to program.
2
3
4
5
1