FujiFilm 1300 - Manual (Page 8)

8
4 Setting the mode
☞ The set mode is displayed.
∗
The LCD backlight is green (mode set) when the power is turned on and when a mode has
been set (goes out after 10 seconds).
The LCD backlight is orange (mode selection) while the mode is being selected (goes out
after 10 seconds of no operation).
∗
When the LCD is difficult to read at night etc, press any of the , , or buttons to turn
the backlight (green) on.
How to use the MENU/SET button and four-direction button
1 Select the menu and mode
1
2
3
4
2 Selecting the menu
☞ Make the menu you want to change blink/light.
3 Selecting the mode
☞ The current mode blinks.