Frymaster CM4-S - Manual (Page 5)

CM4-S COMPUTER OPERATION
(PROGRAMMED FOR TEXAS CHICKEN)
5
Canceling Filtration Prompt
The filtration can be eliminated, if necessary, by following these steps. This process
zeros the filter count
1. At the completion of a cook cycle, the computer
display flashes FILTER.
2. Press the button to turn computer OFF.
3. Press the hidden programming button. See
Figure 1.
4. CODE is displayed on the left side of the
computer.
5. Enter 1119 with the numbered keys.
6. CLR FLTR FUNCTION flashes in display and computer displays OFF
7. Turn the computer on to continue cooking.
Boil Out
Boil out is necessary before using a fryer for the first time and at prescribed times as
part of preventive maintenance. Follow these steps to boil out a frypot:
1. Ensure the shortening is at
operating temperature.
2. Press the button to turn
computer OFF.
3. Pull (gas fryers) or lift (electric
fryers) the red-handled drain-
valve lever. The shortening will
flow into the filter pan.
4. Close the drain valve when all
shortening is drained.
5. Ensure the Shortening Disposal
System is connected and
working properly. Turn the blue
handle in the filter cabinet to
DISPOSE to dispose of spent shortening in the filter pan. Ensure all shortening is
pumped from filter pan and lines before turning blue handle to OFF. Remove and
thoroughly clean filter pan and components. Do not replace filter pan until boil-out
procedure is completed.
6. Fill the frypot to the top OIL LEVEL line with clean water.
7. Pour in boil-out cleaning detergent.
8. Press the hidden programming key on the computer (See Figure 1).
9.
CODE appears on the left display of the computer.
10. Enter 1115.
11.
Boil Out appears in the left display. Press Check to Start appears
in the rights display.
12. Press the button.
13. Boil Out appears in the left display; a time display, which starts at 30:00
DANGER
Never leave the fryer unattended during boil
out. If the boil-out solution boils over, turn
the computer off immediately and let the
solution cool before resuming the process.
WARNING
Do not drain boil-out solution into the built-in
filtration system. It can damage the filter
pump.
Note: Using the 1119 code
zeros out the cook count,
which triggers a filter prompt. A
filter prompt will not reappear
until the cook count reaches
the preset number for a filter
prompt.