Furuno 1732 - Manual (Page 129)

3. PLOTTER OPERATION
3-47
3.10.3 Navigating to ports, port services (NavCharts ™ only)
Some NavCharts ™ have a port service list which shows services available at
ports or harbors. (See page 3-13.) You can use the list to set destination as
follows:
1. Select “35 PTS/PORT SVC” following the procedure in “Selecting quick point
entry method” on page 3-45.
2. Press the GOTO soft key. Then, soft key titles change as in the figure below.
FROM
OS 0.26 nm
180.2
°
M
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA
PORTO
40 ° 45.971'N
13 ° 57.462'E
+ GOTO
QUICK
ROUTE
NEAR
SRVC
PORT
CANCEL
GOTO
16.0nm
Plotter display
3. Press the PORT or NEAR SRVC soft key depending on objective. PORT
shows a list of ports in your area. NEAR SRVC displays the port service list.
¤
¡
¡
¡
¡
¡
¡
¡
▼
PORT & SERVICE
ACCIAROLI
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
▲
Port services
Port list (Italy)
PORT & SERVICE
Port services and sample port list