Furuno 1732 - Manual (Page 73)

2. RADAR OPERATION
2-41
2.25.7 ARP, TTM target data
This ARP calculates motion trends (range, bearing, course, speed, CPA and
TCPA) of all target been tracked. You can show this data for a tracked target as
below. TARGET ID NUMBER, in the ARP SETUP menu, must be turned on to
show ARP target data.
1. Place the cursor on the target whose data you want to see.
2. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys.
3. Press the TARGET and TARGET INFO soft keys. The data of the selected
target appears at the bottom left-hand corner of the display. (If an EBL/VRM
data box is displayed the ARP data box will be under it.)
4. Press the RETURN soft key to finish.
5. To erase the ARP target data box, select the corresponding target with the
cursor and press the [CLEAR] key.
.250/ 319.9 ° T .125nm
SP
H-UP
359.9 ° R
0.240nm
TARGET
TRAIL
TLL
OUTPUT
ACQ
TARGET
INFO
RETURN
ARP
Target
No.01 VECTOR TRUE 15min
CSE 359.9
° T SPD 12.5kt
CPA 2nm TCPA 12.35
CPA and TCPA
Course and Speed
Target No., Vector Reference (True), Vector Time
01
Cursor
+
+
ARP target data