Furuno 1732 User Manual
Page 203
5. CUSTOMIZING YOUR UNIT
5-34
5. Select function desired with the cursor pad or [ENTER] knob and press the
ENTER soft key or [ENTER] knob to register your selection.
6. Press the ENTER soft key or the [ENTER] knob to register your selection.
7. Press the [MENU] key to close the menu.
Sounder function keys
M enu Item
Function
Function Key Label
OFF
Assigns no function.
MOD: AUTO MODE
Display automatic mode selection window.
MOD
G20: GAIN 200 KHZ
Displays 200 kHz gain adjustment window.
G20
G5: GAIN 50 KHZ
Displays 50 kHz gain adjustment window.
G 5
SFT: SHIFT
Shifts range in manual operation.
SFT
NL: NOISE LIMITER
Suppresses noise.
NL
CLT: CLUTTER
Suppresses clutter.
CLT
WMK: WHITE MARKER
Sets white marker. (color only)
WMK
HUE: HUE
Sets hue (color model only).
HUE
SLV: SIGNAL LEVEL
Erases weak signals.
SLV
PA: PICTURE ADV
Sets picture advance speed.
PA
TG: TEMP. GRAPH
Turns temperature graph on/off.
TG
TV2: TVG 200 KHZ
Sets TVG for 200 kHz.
TV2
TV5: TVG 50 KHZ
Sets TVG for 50 kHz.
TV5
EO2: OFFSET 200K
Offsets echo strength for 200 kHz.
EO2
E05: OFFSET 50K
Offsets echo strength for 500 kHz.
EO5
SMT: SMOOTHING
Sets echo smoothing rate.
SMT
ZMR: ZOOM RANGE
Sets zoom range.
ZMR
BLR: B/L RANGE
Sets bottom-lock range for bottom-lock
display.
BLR
TLL: TLL OUTPUT
Outputs current position to plotter. Also
inscribes line on sounder and registers
position as a waypoint.
TLL
SSR: SNDR SOURCE
Selects source
for
sounder data.
Do not
change this setting.
SSR
DBX: D. BOX ON/OFF
Turns data boxes on/off.
DBX
CHG: CHANGE CNTRL*
Switches control in combination display.
CHG
*: When selecting CHG on a display, use the same soft key number on all
display for CHG.