Furuno 1732 - Manual (Page 130)

3. PLOTTER OPERATION
3-48
4. If you selected PORT at step 3, use the cursor pad to select a port and
press the ENTER soft key. Make a route using the soft keys and push the
[ENTER] knob. (If you want to go directly to that port, simply press the ADD
QP soft key followed by the [ENTER] knob.)
If you selected NEAR SRVC at step 3, select service mark desired and
then push the ENTER soft key or [ENTER] knob. Then, the display shows
the locations of those services nearest you. (The figure below shows the
location of filling stations in an area in southern Italy.) Use the cursor pad to
place the “hand cursor” on the port service icon desired and press the
ENTER soft key. Make a route using the soft keys and push the [ENTER]
knob. (If you want to go directly to location selected, simply press the ADD
QP soft key followed by the [ENTER] knob.)
FROM
OS 0.26 nm
180.2
° M
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA
PORTO
40
°
45.971'N
13 ° 57.462'E
+ GOTO
ENTER
CANCEL
GOTO
16.0nm
Sample filling station locations (southern Italy)