Fluke Series II - Manual (Page 24)

Autotest and Central Setup
Introduction
2
2-9
ace208s.bmp
Figure 2-7. Ping SNMP Results
From the Tool menu press (Find Node) to activate
the Station Locator feature, which details switch
information. Read “Station Locator” in Chapter 6 for more
information.
Viewing Multiple Protocols on Station Detail
Displays
The Station Detail display tells you if the station is running
multiple protocols. If multiple protocols are discovered,
the protocol name on the Station Detail display is followed
by a number. For example, Figure 2-8 shows part of the
Station Detail information for a station running three
protocols. Press
(Station) to cycle through the
protocols.
ace209s.bmp
Figure 2-8. Station Running Multiple Protocols
NetWare Devices List
To see a NetWare file server list, run AutoTest then press
(NetWare Server) on the AutoTest display.
The NetWare File Server display (Figure 2-9) shows the
nearest server for each of the four Ethernet frame types