FUJITSU DL3800 - Manual (Page 104)

USING SETUP MODE
User's Manual 5-16
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
<FONT> TIMLS-N
(continued) TIMLS-B
TIMLS-I
DOWNLD# Font 0 or font 1 in the printer’s
download RAM
See Appendix F for font examples.
<QUALITY> Select the print quality that most often
meets your needs.
LETTER Letter print quality. This option
provides the highest resolution but
the slowest print speed. It cannot be
used with the compressed font.
REPORT Report print quality. This option
provides lower resolution than letter
quality, but at twice the speed. If you
want only the double speed, regard-
less of fonts, use the correspondence
font. The quality of the correspond-
ence font is higher than that of report.
DRAFT Regular draft print quality. This
option provides lower resolution than
report quality, but at 3.2 times letter
speed.
HI-DRFT High-speed draft print quality. This
option provides lower resolution than
draft quality, but at 3.2 times letter
speed.
MENU1 and
MENU2 Items
Options Description
#05 Chapter 5 2000.09.20, 2:36 PM 16